Motor Pre-Oil System-FAQ

Motor Pre-Oil System For All Motors And Engines

Your Subtitle text

Motor Pre-Oil System-Frequent Questions

Q: I am using a Miracle Oil Additive that is supposed to eliminate wear on start up so why would I need to install Insta-Lube System??

A: There are a lot of oil additives that claim to eliminate some wear by depositing a film of lubricant on the bearings surfaces.

But none of this will pressurize and adjust the hydraulic valve lifters or positively separate bearing surfaces with pressurized oil like the Insta-Lube Pre lube system.

Q: I have a 1956 Cadillac Coupe Deville and want to keep the same engine appearance; can the tank be mounted remotely?

A: Yes the kit will work on your Caddy; the hose is long enough to place the tank and valve out of site so everything looks stock.

Q: I am rebuilding a 350 Chevy and will install the kit; can the tank be filled with oil ready to prelube the very first startup?

A: There are a lot of experts say the first startup after rebuild or a new engine, creates an exceptional amount of the total bearing wear, and can be avoided completely with the Insta-Lube Kit installed.

Q: I have a Winnebago motor home with a 440 CID V8 Engine will the preluber work on this engine as well as my four-cylinder Nissan?

A: Yes there are 4 Insta-Lube kit sizes to choose from.

Q: It's a well-known fact that a great deal of Motor Bearing Wear is at startup, so why don't the manufactures address the problem?

A: The engine manufactures know that the engines will wear out faster without pre-lubing it is called planed obsolescence to sell more replacement engines.

Q: Will it work on my motor home?

A: All Cars, trucks, SUVs, vans, motor homes, boats, tractors, stationary engines or any other engine using a pressurized oil system will benefit the same with the Insta-Lube System.

Q: How good is the Insta-Lube Pre Lube System in cold weather?

A: This is an area that is especially important as a lot of wear takes place on cold startups, our customers in Iceland really appreciate our Insta-Lube kits.

By installing the Insta-Lube pre-oil Kit you eliminate most of this bearing wear and prolong the life of your engine.

Q: How difficult is the Insta-Lube Pre Lube kit to install?

A: There are 3 easy steps to install the Insta-Lube Kit.

Q: Will the Pre Lube kit be any help in preventive maintenance for my cab?

A: The Insta-Lube System will benefit all engines, some more than others.

Since you have multiple startups daily it will make a substantial reduction in overall engine wear.

Q: Will installing the kit void my engine warranty?

A: Your warranty will not be affected by installing the Insta-Lube kit.

According to the Magnuson-Moss Warranty Act of 1975, Installing aftermarket equipment does not void a vehicle manufacturer's original warranty.

Q: I have a 1951 Pontiac that uses a 6-volt electrical system will the pre-luber work on it?

A: Yes all of the kits can be ordered with 12-volt 24-volt or 6-volt solenoid valves.

Q: Is the oil that is stored in the accumulator tank filtered oil?

A: Yes, only pre-filtered oil from the engine oil galley is stored for pre-lubing the engine the next time you turn the key on.

"Cold Start" can destroy bearing surfaces and lead to progressive failure. "Cold Start" failure shown would have been prevented if the engine had an Insta-Lube Prelube kit installed!